SPARE-11M-2
Spare · fits any 11 m piece (AUD-2/3)
Cut length
11,000 mm
36′ 1.1″ · 11 m
Pixels
220
Full white
253.4 W · 10.56 A
Controller
per swap
Output
per swap
Segment
spare
Leads
NL4 · 12 in each end
Data flow
DATA IN
Whatever this spare replaces
Swap in for any 11 m piece (AUD-2/3). Fed from that piece's controller output or previous segment.
DATA OUT
Next segment of that run
Or end of run if it replaces the last segment.
NL4 SPI wiring · both ends · straight through
| Pin | Wire | Signal |
|---|---|---|
| 1+ | Red | V+ 24 VDC |
| 1− | Yellow | SPI Data |
| 2+ | empty | not used |
| 2− | Black | GND |
Pin map of record: KG3 nl4-spi wire standard. Pin 1+ and 1− carry power + data, 2− is ground, 2+ stays empty. Both leads are wired identically (straight through): the IN lead receives from the controller or previous segment, the OUT lead passes to the next segment. Ferrule every conductor at screw-terminal ends.
Product
Product
Pitch
50 mm · 20 px/m
IC
WS2811
Voltage
24 VDC
Power
23.04 W/m full white
Rating
IP67 · 420 g/m
Printed QR
Code tf7a7e
https://qr.kg3.io/tf7a7e
Show label · re-pointable at qr.kg3.io
https://qr.kg3.io/tf7a7e
Show label · re-pointable at qr.kg3.io