SPARE-5M-1
Spare · fits any 5 m piece (USR)
Cut length
5,000 mm
16′ 4.9″ · 5 m
Pixels
100
Full white
115.2 W · 4.8 A
Controller
per swap
Output
per swap
Segment
spare
Leads
NL4 · 12 in each end
Data flow
DATA IN
Whatever this spare replaces
Swap in for any 5 m piece (USR). Fed from that piece's controller output or previous segment.
DATA OUT
Next segment of that run
Or end of run if it replaces the last segment.
NL4 SPI wiring · both ends · straight through
| Pin | Wire | Signal |
|---|---|---|
| 1+ | Red | V+ 24 VDC |
| 1− | Yellow | SPI Data |
| 2+ | empty | not used |
| 2− | Black | GND |
Pin map of record: KG3 nl4-spi wire standard. Pin 1+ and 1− carry power + data, 2− is ground, 2+ stays empty. Both leads are wired identically (straight through): the IN lead receives from the controller or previous segment, the OUT lead passes to the next segment. Ferrule every conductor at screw-terminal ends.
Product
Product
Pitch
50 mm · 20 px/m
IC
WS2811
Voltage
24 VDC
Power
23.04 W/m full white
Rating
IP67 · 420 g/m
Printed QR
Code wh4cfx
https://qr.kg3.io/wh4cfx
Show label · re-pointable at qr.kg3.io
https://qr.kg3.io/wh4cfx
Show label · re-pointable at qr.kg3.io